RacingLine OEM+ Performance Tuning for
300 I 310 I 320 PS Continental Turbo
RacingLine OEM+ Performance Tuning for
300 I 310 I 320 PS Continental Turbo
RacingLine OEM+ Performance Tuning for
300 I 310 I 320 PS Continental Turbo
RacingLine OEM+ Performance Tuning for
300 I 310 I 320 PS Continental Turbo
RacingLine OEM+ Performance Tuning for
300 I 310 I 320 PS Continental Turbo
RACINGLINE TUNING SOFTWARE REMAP FOR GOLF MK7 R, AUDI S3 8V, AUDI TTS AND LEON CUPRA 2.0 TSI EA888.3 IS38 TUNING
2.0 TSI EA888 Gen.3
RacingLine Performance Tuning
for 2.0 TSI IS38-turbo cars
Tuning for 2.0 TSI
EA888 Gen.3 IS38
By RacingLine.
Our OEM+ Performance Software is simply the most effective modification you can make to the 2.0 TSI IS38 engine.
Every aspect of an engine’s behaviour is controlled by the calibration software installed on the Engine Control Unit (ECU), your car’s on-board computer.
Take a read below to see the stages of performance on offer with RacingLine, and how we can significantly & safely enhance the power of your vehicle.
Remember, it's only with RacingLine that you get FREE upgrades up to the next stage whenever you're ready to continue on your tuning journey.
And now, with our PDM Power Delivery Module, you can take control of your own software flashing, any time, anywhere.
Let's talk numbers....
Higher-output EA888.3
Note - factory power outputs for this engine vary by model between 300 and 310 PS dependant on model. But the RacingLine tuned figures apply to all these.
STAGE 1
Stage 1 is all about delivering a transformative power & torque gain, but with no mechanical changes needed. And as the dyno graphs show all so clearly, it's a night and day difference.
300/310PS
380NM
220KW
380NM
296BHP
290lbft
STOCK
370PS
471NM
272KW
471NM
365BHP
347lbft
NON-GPF MODELS
355PS
465NM
261KW
465NM
350BHP
343lbft
GPF MODELS
STAGE 1
STAGE 1
CALIBRATION FOR DIFFERENT FUEL GRADES AVAILABLE:
95ron / 93 AKI
(POWER FIGURES WILL VARY)
STAGE 1
CALIBRATION FOR DIFFERENT FUEL GRADES AVAILABLE:
95ron / 93 AKI
(POWER FIGURES WILL VARY)
CLICK TO ENLARGE
CLICK TO ENLARGE
Fancy an extra 15-20PS?
Although Stage 1 requires no mechanical changes, adding our R600 intake and Turbo Inlet typically adds another 15-20PS on top of these figures. Highly recommended!
Want more?
Our Higher tuning levels.
See our higher states of tuning for the 2.0 TSI gen.3 cars. Stage 1+ retains OPF/GPF legality, or (where permitted) Stage 2 without OPF/GPF gets the maximum gains.
STAGE 2
Stage 2 gives the ultimate performance from the factory IS38 turbo. Requiring the full R600 intake and turbo inlet, intercooler and a high-flow catalyst.
If your car is OPF/GPF, then this must be deleted for Stage 2. Therefore Stage 2 is only legal for markets where GPF is not factory fitted, or is legal to delete, or when car is to be used off-highway for racing purposes only.
300PS
380NM
220KW
380NM
296BHP
290lbft
STOCK
392PS
533NM
288KW
533NM
387BHP
347lbft
STAGE 2
STAGE 2
CALIBRATION FOR DIFFERENT FUEL GRADES AVAILABLE:
95ron / 93 AKI
(POWER FIGURES WILL VARY)
CLICK TO ENLARGE
STAGE 3
Stage 3 takes your car to whole new level of performance. By replacing the IS38 with our own hybrid turbo, you'll be accessing true supercar performance levels.
We've carefully and deliberately developed this Stage 3 Kit to work with the standard engine, with no need to build/open up the engine. And if you're already at Stage 2, the only additional hardware you'll need is our turbo, and a high-pressure fuel pump, plus our Stage 3 Calibration. That's it.
With literally hundreds of our Stage 3 kits running around the work on road and track, this is truly a 'plug and play' gateway to reliable supercar performance.
300PS
380NM
220KW
380NM
296BHP
290lbft
STOCK
487PS
575NM
358KW
575NM
480BHP
424lbft
STAGE 3
STAGE 3
CALIBRATION FOR DIFFERENT FUEL GRADES AVAILABLE:
95ron / 93 AKI
(POWER FIGURES WILL VARY)
CLICK TO ENLARGE
GPF/OPF?
Our Higher tuning levels.
As it's illegal to remove OPF/GPF, we've been working hard on solutions for higher levels of tuning - Stage 1+ and Powermax.
Firslty, what is
GPF/OPF?
For many markets around the world, post 2019 model year cars have a Gasoline Particulate Filter (GPF, sometimes known as PPF/OPF).
In most countries it is illegal to remove or modify the GPF. For these countries, Stage 2 and above mapping would therefore be strictly illegal.
And that is why we've come up with Stage 1+ and our Garrett Powermax Turbo solutions for the GPF cars.
Is it as powerful as Stage 2? Not quite, but by using all of our intake system parts and intercooler, we can extract the maximum power and torque while keep your car legal.
STAGE 1+
GPF/OPF ONLY
Stage 1+ is our tuning solution for drivers who want to get the maximum out of their OPF/GPF car without a turbo swap. It requires the R600 air intake and turbo inlet pipe, plus intercooler.
But crucially, the exhaust, catalyst and OPF/GPF are not changed for Stage 1+ in order to remain road-legal in most countries.
300PS
380NM
220KW
380NM
296BHP
290lbft
STOCK
375PS
480NM
276KW
480NM
370BHP
354lbft
GPF CARS ONLY
STAGE 1+
STAGE 1+
CALIBRATION FOR DIFFERENT FUEL GRADES AVAILABLE:
95ron / 93 AKI
(POWER FIGURES WILL VARY)
CLICK TO ENLARGE
POWERMAX
GPF/OPF ONLY
The RacingLine PowerMax GPF uses a replacement Garrett turbocharger for highly impressive results!
With this turbo-swap, you'll need the same hardware requirements as Stage 1+ (our R600 intake pack plus Intercooler). However, the downpipe, catalyst and GPF are untouched - saving you money and crucially keeping your car legal (although please check you local market rules).
300PS
380NM
220KW
380NM
296BHP
290lbft
STOCK
433PS
534NM
318KW
534NM
427BHP
393lbft
GPF CARS ONLY
POWERMAX
POWERMAX
CALIBRATION FOR DIFFERENT FUEL GRADES AVAILABLE:
95ron / 93 AKI
(POWER FIGURES WILL VARY)
2.0 TSI MQB / EA888 Gen 3 IS38
VW Golf 7 & 7.5 R 2013+ 5G
VW Golf 7 GTI Clubsport 2015+ 5G
VW Golf 7.5 TCR 2018+ 5G
VW Passat 2.0 TSI 4Motion 2014+ B8
VW Arteon 2.0 TSI 4Motion 2017+
Audi S3 2013+ 8V
Audi TTS 2.0 TSI III 2014+ 8S
SEAT Leon Cupra III 2014+ 5F
Skoda Superb 2.0 TSI 4x4 2015+ 3V
2.0 TSI MQB / EA888 Gen 3 IS38: 2019+ GPF 'WLTP'
VW Golf 7.5 R GPF 2019+ 5G
VW Golf 7.5 TCR GPF 2019+ 5G
VW T-Roc R 2.0 TSI GPF 2019+
VW Passat 2.0 TSI 4Motion GPF 2019+ B8
VW Arteon 2.0 TSI 4Motion GPF 2019+
Audi S3 GPF 2019+ 8V
Audi TTS 2.0 TSI III GPF 2019+ 8S
Audi SQ2 GPF 2019+
Audi Q3 45TFSI 2.0 TSI GPF 2019+
SEAT Leon Cupra III GPF 2019+ 5F
SEAT Ateca Cupra GPF 2019+
Skoda Superb 2.0 TSI 4x4 2019+ 3V
Confirmed applications.
2.0 TSI MQB / EA888 Gen.3
Higher Output / IS38 Turbo
PDM App-Connect
Mobile Phone Flashing
Once you've purchased and installed your PDM system, simply download the free PDM App onto your Apple or Android phone or tablet, and take full control of your tuning from your device, wherever you are at the time (providing you have phone/data coverage).
Your smartphone can now connect wirelessly to the PDM dongle, which is connected via the OBD port.
-
Tune your car using your smartphone
-
Swap between different fuel grades
-
Change to different tune level
-
Activate Theft-Protect (where available)
-
Return to stock any time
-
Check for fault codes (DTCs) and erase
RacingLine PDM.
End-user Flashing Tool and Cable.
Welcome to PDM - a whole new way of installing, upgrading and managing your RacingLine Software, any time, anywhere, and fully compatible with this 2.0 TSI tuning.
The Power Delivery Module allows you to access the full RacingLine Performance Software calibration suite for your car from your laptop or via your mobile device with the free App-Connect download. Quickly and safely reflash your Engine Control Unit (ECU) and DSG Transmission Control Unit (TCU) anywhere with a wifi/phone connection.
Meaning you can install your software, vary between fuel types, return to stock or activate Theft Protect as often as you want, wherever you want.
Hardware required?
Stage by stage.
Our Stage 1 Calibration needs no hardware/parts upgrades to achieve the quoted power outputs.
However, Stages 1+, 2 and 3 have the essential upgrades required to support these calibrations.
REQUIRED
NOT REQUIRED
OPTIONAL
DSG Tuning.
Dynamic TCU Upgrades.
The RacingLine TCU Dynamic Tuning for your DSG gearbox is a great complement to engine tuning to get the most out of your car's newfound performance.
With our unique Dynamic programming, it reacts to your ECU's torque requests to vary between full clutch pressure for ultimate performance, and lighter pressures for gentle driving. Meaning that this one Dynamic TCU calibration works from a standard car on the school run right up to a Stage 3 car on the drag strip.
It also reprograms the shift characteristics to give a much more natural and enjoyable drive, rather than always trying to shift up to top gear at the earliest opportunity.
Find out why you should get our OEM+ TCU Dynamic Software for your DSG. Essential for Stage 3 cars. Highly recommended for others.
Smart stuff.
Our Features.
Some nice extra details.
It's not just the performance gains. Our RacingLine Software calibrations also feature some nice added extras!
Speed Limit Removal
Raised Rev Limit
Left Foot Braking enabled
Performance Gauges rescaled:
-
boost pressure
-
torque
-
power (in KW)
Start/stop inversion - default to 'off' on startup
Free upgrades to higher stages of tune
30-day money-back guarantee
BENEFITS OF OEM+
UNIQUE APPROACH
It's by reprogramming the very basis
of the controller itself that we
achieve the results we get - just as
the manufacturers themselves work.
MATCHED TO HARDWARE
No other brand can offer you such a
comprehensive 'full-car' tuning
solution. Our Performance Parts
range is the most complete on the
market, all matched perfectly to
the OEM+ software.
GREAT PERFORMANCE
PEACE OF MIND
By starting from scratch for each
calibration, OEM+ achieves a very
different level of performance and
drivability. It's never just about winding
up the peak power.
We are uniquely positioned to tap into a
vast knowledge base and resources
network in our development. And we're confident enough that you'll love it that we offer a 30 day full money-back guarantee.
UPGRADES FOR LIFE
RETURN TO STOCK
Free upgrades on your car for as long
as you own it. Start with OEM+
Stage 1, then we will give you Stage
2 and even Stage 3 Performance
Software for free!
Should you ever want to return your
car to standard, the OEM+ system
has the facility to return your ECU
to 'True Stock', the exact state it
was in prior to installation of OEM+
tuning.
POWER AND TORQUE GAINS
The amazing gains at all tuning stages from the 2.0 TSI EA888.3 engine speak for themselves. Your car will be simply transformed.
PEACE OF
MIND
We are uniquely positioned to tap into a vast knowledge base and resources network in our development. And we're confident enough that you'll love it that we offer a 30 day full money-back guarantee.
THOROUGH
DEVELOPMENT
Many years in development. Hundreds of thousands of miles. Testing across the world. Proven on road, track and dyno.
FREE UPGRADES
Free upgrades on your car for as long as you own it. Start with OEM+ Stage 1, then we will give you Stage 1+, Stage 2 and even Stage 3 Performance Software for free whenever you're ready.
BEAUTIFUL DRIVEABILITY
By starting from scratch for each calibration, OEM+ achieves a very different level of performance and drivability. It's never just about winding
up the peak power.
RETURN TO STOCK
Should you ever want to return your
car to standard, the OEM+ system
has the facility to return your ECU
to 'True Stock', the exact state it
was in prior to installation of OEM+
tuning.
Why RacingLine?
Benefits of OEM+ Software
How do I buy?
Our RacingLine dealers.
Our OEM+ software can be purchased and installed through any one of our recognised worldwide OEM+ Technical Centres. Visit our dealer locater page to find your nearest RacingLine OEM+ dealer.
You have two choices from your RacingLine Dealer. They can install your software for you, or they can supply you with a PDM Power Delivery Module which will allow you install your calibration yourself, then upgrade or change your calibration, or return your car to stock at any time.
PCM
plug+/:play>
POWER CONTROL MODULE
from
What about PCM?
The alternative to a remap.
Of course, not everyone is ready to tune their car.
PCM is RacingLine's alternative 'Plug & Play' tuning solution ideal for anyone who prefers not to remap their car. PCM is developed exclusively for these MQB cars such as Golf mk7 GTI, Golf mk7 R, Audi S3 8V, Cupra Leon & Octavia vRS.
PCM stands for ‘Power Control Module’ and is the perfect starting point to bring your MQB 'Evo' car to life with more power and torque without remapping the ECU.
Easily installed, and easily removed at any time without a trace.
And best of all, whenever you want, you can trade your PCM up to a RacingLine OEM+ calibration for free.
Why do Volkswagen
choose RacingLine?
Special Projects.
Stage 2 & Stage 3
NOTE
All of the above power figures are accurate, tested illustrations; however, please do remember that actual power figures can vary up or down slightly dependant on many factors such as the condition of your engine & ancillaries, the fuel quality, climate and altitude, other modifications fitted, and even testing methods.
Also please remember that changing your car's software will affect its manufacturer warranty. It is your responsibility to notify your insurer and to ensure that your car still complies with all your local road laws.
By adding significant power and torque gains to your engine & drivetrain, wear and tear may be accelerated on these mechanical components, especially if driven hard. Regular servicing and high quality lubricants are more important than ever at higher power levels. Please consult your supplying dealer for full information.